"We do not remember days, we remember moments." Cesare Pavese

Saturday, October 31, 2020

celebrate...

Hello!  Hope things are well in your world.   Things are going well in my world... I got a card made!  I don't think I have done this much coloring with Copic markers ever.   As I started out I was coloring only a two or three petals at a time.  By the time I got to the end of the coloring I was coloring the entire flower with one color then moving onto the next one and so on!   The colors are from Color Throwdown so I will be entering the card there, as well as at the Just Us Girl challenge to use a word die on your card.   After I finished all of the coloring I die cut a piece of white cardstock with the largest Stitched Dot rectangle die from A Jillian Vance Design.  The daisy stamp is also from A Jillian Vance Design and I die cut all of them with the matching die.  I then adhered them to the panel.  The ones on the short sides of the panels were adhered flat to the panel and the ones on the long side were adhered with foam dimensionals.  I then trimmed off the excess and adhered the panel to a kraft cardstock base.  I die cut the word celebrate (from one of the AJVD slimline die sets) from lime green cardstock four times, adhered them together and added them to the front of the card.   While it took a long time to make this card I'm super pleased with how it turned out.  Also going to add this the Simon Says Stamp Wednesday challenge.




Thanks for stopping by and have a wonderful day!

Thursday, October 29, 2020

creating with fun stampers journey...

 Hello everyone!  Today I'm popping in with a card that I made with some lovely products from Fun Stampers Journey/Spellbinders.   These products are from the newly released FSJ Buzzworthy collection.  My card uses the lovely Sweet as Honey stamp set and the Sweet Honeycomb stencil.  I started my card by inking up one corner of a white cardstock panel using the stencil and Squeezed Lemonade distress oxide ink.  I then scored a line at an angle from one side of the panel to the other.  It is hard to see so I included a close up photo.   I then stamped the flower and a leaf on Tim Holtz watercolor cardstock with VersaFine CLAIR Nocturne ink and then I did some simple watercoloring.  Once the flower and the leaf were mostly dry I trimmed them out.   By doing this I allow some natural curling to occur that lifts up the edges of the flower to give it dimension when I adhere it to the panel.  Before adhering the flower to the panel I adhered the second leaf behind the flower and let that dry.  When it was dry I placed the flower on the panel so I could place the sentiment where I wanted it and then stamp.   The flower was then adhered to the panel with glue.  I added some yellow Stickles to the center of the flower for a little sparkle.   I based my card on the sketch from Freshly Made Sketches so I will be posting it there.  I'm also going to send this off to the Simon Says Stamp Wednesday challenge of anything goes.



Thanks for stopping by today!  I hope you will check out these new products from Fun Stampers Journey/Spellbinders.  And don't forget about the opportunity to save 30% off select Spellbinders kits.

Wednesday, October 28, 2020

Happy Wednesday!

 Hello everyone!  Wow... October is almost over and Halloween is on Saturday.  Going to be a little different this year for sure.  I haven't bought much Halloween candy as I don't think there were be many trick or treaters, but you never know.  It is Wednesday and that means I have a post up on the AJVD blog today.  Here is a little peek:


I hope you will head over to the AJVD blog to check out my card and to let me know what you think.  Thanks for stopping by and have a lovely day!

Tuesday, October 27, 2020

holiday sparkle...

 Hello everyone!  I'm popping with some holiday cards that I created using the gorgeous Sparkling Holidays card kit from Spellbinders!  This kit is jam packed with all kinds supplies to create amazing Christmas cards!  I made three and I have one more to complete that I will share at a later date and I can create many more with all the supplies I have left!  The value is absolutely phenomenal!  And right now you can save up to 30% on past kits!  Simply click on the banner below to be taken to all the kits that are on sale.   

 

 Now on to my cards!   I made all three cards using just a small sample of the dite cut n pieces that are found in the kit.   I also used different patterned papers from the kit.  You get a full 6x6 pad of patterned papers!  I trimmed down a piece that has a star pattern on it and then layered on three trees, a sparkling deer and a banner with the sentiment fa la la la.   To finish off the card I added tiny rhinestones (a pack comes in the kit) to some of the stars on the card.  It is hard to see in the photo, but if you click on it you should be able to see them.


This next card uses one of  dies (yes... you get dies in this kit!) along with another die cut piece and a banner.  I die cut some patterned paper with a Spellbinders rectangle die (no longer available) and then a piece of aqua cardstock from the kit to layer behind the patterned paper.  I layered on the rectangle and then the swan and the banner.   I used the poinsettia and leaves die to cut flowers from pink cardstock from the kit and the leaves from dark green cardstock from the kit.  I then layered the flowers on the swan as you see.  I finished off the card by adding more of those rhinestones I used in the first card to the center of each flower.  I think this card is my favorite of the three.  Adding this to the Simon Says Stamp Wednesday challenge.

 

The final card is just fun!  I used two large word die cuts from the kit along with a sparkly ampersand for the main elements on the card.   Many of the papers in the 6x6 pad you get in the kit have foiling on them and I used one with a fun star pattern on it.  I trimmed that down and adhered it to one of the card bases included in the kit (you get ten card bases and ten envelopes in the kit!).  I then layered on the two words and the ampersand.  I finished off the card with a sentiment from the stamp set included in the kit that I embossed in black on vellum.  It was die cut with a Spellbinders banner die.   


I hope you enjoyed seeing my Christmas designs and that you will check out the sales going on at Spellbinders right now.  If you are a curent Spellbinders club kit member you will save even more on your purchase!  Thanks for stopping by and have a wonderful day!

Monday, October 26, 2020

thanks...

 Hey there!  Popping in with a card that features more leaves, lol!  What can I say... it is fall and I love stamps that feature leaves!   These are from Altenew and this will be heading over to the Altenew Inspiration challenge.  I stamped the images using VersaFine CLAIR Acorn ink and then watercolored the leaves and the background using the Altenew 12 pan watercolor set.  Once it was dry I die cut the panel.  I used the Altenew fancy thanks die (think that is what it is called) for the main sentiment and die cut it from very thick vellum three times.  After stacking the words together I placed them on my panel so I could place the smaller sentiment in the right spot.  That was stamped with VersaFine CLAIR Nocturne ink and then I adhered the thanks.  


Thanks for stopping by and have a wonderful day!

Saturday, October 24, 2020

more leaves!

 Hello everyone!  Popping in with a couple of cards that feature... yes... leaves, lol!  I recently got my Spellbinders small die kit for October and I just had to make something with it.  I went with the colors from Color Throwdown and I will be adding it to the current Simon Says Stamp Wednesday challenge of layering.  I did a lot of layering with this one!  I die cut the main layer pieces from black cardstock and all the little leaves from kraft and a cranberry red cardstock.  I then layered on all the little leaves.  That was quite the task!  I then linked up all the pieces on a cream colored cardstock panel.  The sentiment is from a Spellbinders Glimmer plate set and I foiled it in red on to kraft cardstock.  The sentiment has a matching die so I used that to trim it out and popped it up in the center.   I added the panel to a kraft cardstock base to finish things off.  



 This next cards also features leaves and I will be sending it off to CAS(E) this Sketch (thanks for the Honorable Mention!), the Card Concept and the Reverse Confetti Stock Your Stash challenge.  Whenever I can (which isn't often!) I tried to pick up something from Reverse Confetti when they have a new release.  I was able to get the new In All Things stamp and die set so I used that for my card.  I stamped the wreath using VersaFine Acorn ink and then watercolored very simply using the Altenew 12 pan watercolor set.  Once I had enough layers of color and it was dry I die cut it with the matching die. For the vertical element in the CTS layout I used dark green and gold twine.  I created a little bow for the wreath out of the same twine and attached it at the top.  I stamped the sentiment from the RC Fall Foliage set (I only used part of the sentiment) in Acorn ink and then adhered the wreath using foam dimensionals.   I guess my card would fall into a clean and layered category for the Card Concept.  I pulled different colors from the inspiration photo.





Thanks for stopping by and have a wonderful day!